Thread Gauge Certification

Standard UKAS certification by independent third party accredited laboratory. Add to your thread gauge purchase if required. See PDF price list for full details.

Product Image Product Name Price Ex VAT Your Price Ex VAT Quantity
Calibrate Go & NoGo Thread Plug Gauge up to 4" image Calibrate Go & NoGo Thread Plug gauge up to 4"
(CTPL10)
£ 12.50 £ 12.50
Name on Certificate
Add
Calibrate Taper thread Plug gauge Basic 1 step to 2" image Calibrate Taper thread Plug gauge Basic 1 step to 2"
(CTPL20)
£ 19.50 £ 19.50
Name on Certificate
Add
CalibrateTaper thread Plug gauge Basic 1 step over 2" image Calibrate Taper thread Plug gauge Basic 1 step over 2"
(CTPL21)
£ 24.80 £ 24.80
Name on Certificate
Add
Calibrate Parallel Thread Ring Gauge to 4" image Calibrate Parallel Thread Ring Gauge to 4"
(CTRI01)
£ 17.00 £ 17.00
Name on Certificate
Add
Calibrate Taper Thread Ring Gauge Basic to 4" image Calibrate Taper Thread Ring Gauge Basic to 4"
(CTRI10)
£ 28.90 £ 28.90
Name on Certificate
Add
calibration_1-(1).png

 

We are partnered with Rhopoint Metrology Ltd www.rhopointmetrology.com for UKAS calibration of all stock and custom made thread gauges that are purchased from us.

If you buy a gauge and need certification you can buy by selecting the relevant service from above list.

Gauges for calibration are collected from us on Wednesday and Friday, when calibrated gauges are also returned. Usual turnaround is seven working days but it can stretch to ten so please add this to delivery times. Note that working days are Monday to Friday not including holidays.

Express service is available but remember that the gauge will need to get to the laboratory, then spend 24 hours being temperature stabilised before it can be calibrated.

We do not keep calibrated gauges in stock as a certificate only lasts for a year and should have the owners name on it.

We can issue certificates of conformity but these only state that the gauge has been manufactured to certain standards. It does not state that the gauge is within tolerances of those standards. We can issue these same day.

 

We can arrange calibration for your ownn thread gauges at the following prices:

THREAD PLUG GAUGES PARALLEL THREAD

PRICE

Single end go or no go up to 4" £8.00
Single end go or no go up over 4" up to 6" £15.50
Single end go or no go up over 6" up to 10" £26.50
Single end go or no go up over 10" £42.90
Double end go & no go up to 4" £12.50
Double end go & no go up over 4" up to 6" £21.50
Double end go & no go up over 6" up to 10" £29.20
Double end go & no go up over 10" £53.202

THREAD PLUG GAUGES TAPER THREAD

PRICE

Basic 1 step, up to 2" £19.50
Basic 2 step over 2" £24.80

THREAD RING GAUGES PARALLEL GO or NOGO

PRICE

Up to 4" £17.00
Over 4" to 6" £22.50

THREAD RING GAUGES TAPER THREAD

PRICE

Up to 4" £28.90

THREAD CALIPER GAUGES

PRICE

All sizes reset and calibrate £19.50
Up to 4" Regrind, reset, calibrate £43.00

Caliper prices assume setting plug is available. If not available work will be quoted on individual basis
 

Above prices are for standard pitch diameter check. For full dimensional check please enquire.