Get up to 50% off for first time buyers by entering "NEWREG" code

Thread gauge Certification

Standard UKAS certification by independent third party accredited laboratory. Add to your thread gauge purchase if required. See PDF price list for full details.

We are partnered with Rhopoint Metrology Ltd www.rhopointmetrology.com for UKAS calibration of all stock and custom made thread gauges that are purchased from us.

If you buy a gauge and need certification you can buy by selecting the relevant service from the list below.

Gauges for calibration are collected from us on Wednesday and Friday, when calibrated gauges are also returned. Usual turnaround is seven working days but it can stretch to ten so please add this to delivery times. Note that working days are Monday to Friday not including holidays.

Express service is available but remember that the gauge will need to get to the laboratory, then spend 24 hours being temperature stabilised before it can be calibrated.

We do not keep calibrated gauges in stock as a certificate only lasts for a year and should have the owners name on it.

We can issue certificates of conformity but these only state that the gauge has been manufactured to certain standards. It does not state that the gauge is within tolerances of those standards. We can issue these same day.

1-12 of 21 products
item #CTCA01
Calibrate Thread Caliper Gauge All Sizes
Stock: 0
item #CTPL01
Calibrate Go or NoGo Thread Plug Gauge to 4", T1"
Stock: 0
item #CTPL02
Calibrate Go or NoGo Thread Plug Gauge 4 to 6", T1"
Stock: 0
item #CTPL03
Calibrate Go or NoGo Thread Plug Gauge 6 to 10", T1"
Stock: 0
item #CTPL04
Calibrate Go or NoGo Thread Plug Gauge Over 10", T1"
Stock: 0
item #CTPL10
Calibrate Go & NoGo Thread Plug gauge up to 4", T1"
Stock: 1,135
See product details
item #CTPL11
Calibrate Go & NoGo Thread Plug gauge 4 to 6", T1"
Stock: 0
item #CTPL12
Calibrate Go & NoGo Thread Plug gauge 6 to 10", T1"
Stock: 0
item #CTPL13
Calibrate Go & NoGo Thread Plug gauge Over 10", T1"
Stock: 0
item #CTPL20
Calibrate Taper thread Plug gauge Basic 1 step to 2", T1"
Stock: 1,030
See product details
item #CTPL21
Calibrate Taper thread Plug gauge Basic 1 step over 2", T1"
Stock: 1,002
See product details
Page 1 of 2
Please note that the products listed on this website represent a small collection of our actual stock. We are continually working towards listing more, in the meantime please call us on 0044 1527 520580 or contact us here to discuss your requirements.

If you have any questions about any of our engineering tools, please call us on 01527 520 580

Contact us

Copyright © WISEMAN Threading Tools Ltd. All rights reserved.

Company Reg. no: 2703287 (England & Wales) | VAT Reg. No.: GB454859800KD

SagePay Visa Mastercard

Our website uses cookies and by using the site you agree to this. Learn more about cookies and how to manage them here.